Scraper Rubber Floor Mat Design Specifications
Scraper Rubber Floor Mats are all-rubber mats that features a digital imprint. A digital imprint allows for much more detail; and bright, vivid colors can be easily achieved. PMS colors can be matched for an additional one-time fee.
- Minimum Text Height: 1/2" (includes lower case text)
- Minimum Line Thickness: 1/16"
The text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
The background color of the imprint area should not be set to White. It is difficult to keep the logo clean through the manufacturing process.
Important Disclaimers:
Mat Sizes:
- Mats are not exact and have a 3-5% size variance in all finished sizes and is just part of the manufacturing process and materials
- We do not guarantee an exact match to the inch and on large orders mat sizes may vary within this range. For rough finished sizes, please reference each product page
Color Selections:
- Final colors tend to be a little lighter than what you see online because of the heat press which causes the colors to lighten
- If you are concerned about the color being dark enough for your background or any other color, please select the next darkest color
PMS Matching:
Although we can get remarkably close, color is never an exact science and variations will occur. An absolute exact color match is vulnerable to many factors.
- One factor is that we are printing on white, nylon or other fabric carpets
- A hot press is used to combine the carpet and rubber backing and the heat from the press often causes the color to lighten
- How the fibers are laying, and your viewing position will often change the color slightly
Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch.